Product Showcase

  1. Flow Transfer Panels
    Flow transfer panels have been CSI's passion for more than 20 years. With its patented spool design and distinctive manufacturing method, CSI has emerged as the leading supplier of transfer panels for virtually any application.
  2. AL-6XN Alloy
    AL-6XN alloy is a super-austenitic metal designed to resist crevice corrosion, pitting, chloride-induced corrosion, and stress corrosion cracking. It can also withstand alkaline and salt solutions, protecting against metallic contamination of product and preventing rapid degradation of the fluid transfer system.
  3. Hastelloy C-22
    C-22 alloy is one of the most versatile nickel-chromium-molybdenum-tungsten alloys available today. This alloy demonstrates improved corrosion resistance to both uniform and localized corrosion and will exceed the performance of C-276, C-4, and alloy 625 in a variety of corrosive environments.
  4. Vessel Trim
    CSI offers innovative piping design, fabrication, and documentation. No-foam inlets or J-tubes, static sprayball assemblies with standard drilling, and custom-drilled sprayball assemblies for riboflavin testing are just some of the features that CSI provides.
  5. Clean In Place (CIP) Systems
    Integrating your clean-in-place (CIP) system with the process design is an important step that should not be overlooked. With CSI, you’ll benefit from the company's years of experience in the sanitary processing industry as they assist you in selecting the CIP system that’s right for your process.
  6. Special Fittings and Adapters

    CSI's unique shop environment allows us to quickly respond to a variety of engineering and fabrication challenges. By combining CSI's vast resources with exceptional designers, machinists, welders, and finishers, we are able to deliver a timely solution for your process.

  7. Pipetite® Wall Boot
    Pipetite is the flexible, self-sealing wall boot that can seal a penetration while allowing for significant movement of the pipe. Installation is simple, and Pipetite accommodates a large range of sizes and offers valuable features, while remaining cost competitive.
  8. Utility Stations
    Utility stations provide point-of-use connections for clean steam, condensate, process gases, CIP, chilled water or glycol, and WFI. Proper design is a must when manufacturing your utility station. CSI designers will create the ideal station for your application.
  9. Valve Manifolds
    As experienced fabricators of valve manifolds, CSI identifies and understands the critical issues that go into the fabrication process. CSI's thorough planning stage helps alleviate the potential for problems.
  10. HSM-3 Gradient Heat Sealer

    The HSE-3 is a multi-jaw heat sealer system designed for more efficient determination of heat seal thresholds. Up to 5 jaws can be fitted with independent temperature control providing a temperature gradient on the film.