Product/Service

FEM-03 Flow Monitor

Source: AW Company
The FEM-03 is one of the most versatile indicators ever designed
Applications:

Rate, Totalization, Ratio and Net Difference

The FEM-03 is one of the most versatile indicators ever designed. This simple to use and program unit can take either one or two flow meter inputs. The large LCD display will indicate flow rate, flow rate A+B, flow rate A-B, total and grand total, plus ratio and flow direction if desired. Programmable limit capabilities are standard with an assignable 4-20 mA signal as an option. Remote programming or monitoring is available via the RS-232 serial port.

Technical Data
Table
Sensor Input: Sensor Power Supply:
Two inputs, 4 KHz max, 2 V min, 10 Kohm impedance Two @ 15 VDC/20mA
Power Supply: Display:
16 VAC/500mA with supplied 110 VAC transformer or 24 VDC/200mA customer supplied LCD graphic display with LED backlight
Environmental: mA Output:
Storage: -40° to 85°C Optional self-powered output into a max 400 ohm load impedance
Operating: 0° to 50°C Housing:
Humidity: 10 to 90% Non-condensing Front Panel 3.8" wide, 2.85" high
Limits: Required Panel Cutout 3.6" wide, 2.6" high
Two Form C limit relays Total depth including connectors is 5.5""

AW Company, 8809 Industrial Drive, Franksville, WI 53216-9337. Tel: 262-884-9800; Fax: 262-884-9810.