Packline Materials Handling Announce The Production Of Their New Single Arm Clamping Vertical Spindle Attachment For Handling Telescoping Rolls Of Foil And Film
Kansas City, MO (PRWEB) - New to Packline Materials Handling and Ultrasource LLC, the single arm clamping vertical spindle was designed to handle rolls of film or foil that have a tendency for telescoping during handling. This roll handling solution is suitable for clean room high care environments such as the food, drinks, pharmaceutical and packaging industries.
This vertical spindle attachment incorporates a single clamping arm with nitrile rubber pads to ensure that the roll is held securely in position.
The attachment is suitable for a range of smaller rolls with diameters ranging from 16” (400mm) up to 20” (500mm), where it is not necessary to clamp both sides of the roll. This lifter is ideal for confined spaces and narrow production lines with a limited area for maneuvering.
In addition to the clamping mechanism, the rolls are securely gripped by the core. This mechanism has a torque limiter fitted so that the clamping fingers do not over or under tighten in the core. This enables the operator to lift the rolls with complete confidence and safety.
This model has a gearbox with a manual handwheel for the rotation to and from the vertical to horizontal orientations. A further handwheel provides the reel gripping and release action of the core. A third handwheel provides the clamping action of the single arm.
The attachment has been designed to provide strength, durability as well as improved wear resistance and enhanced ease of use which provides a simple and safe action.
Furthermore, it is backed up by a full bespoke design service so ensuring that the right solution can be made to suit most rolls.
All Packline attachments are fully interchangeable and can be easily fitted or removed from any model of ‘Compac’ lifting machine that is fitted with the quick release system.
Specifications:
- Lifting Capacity: 246lbs (120kg)
- Roll Diameters: 15.75” to 19.68” (400mm to 500mm)
The attachment has been designed to provide strength, durability as well as improved wear resistance and enhanced ease of use which provides a simple and safe action.
This stainless-steel roll lifting machine is suitable for use in the following industries:
- Food
- Drinks and Beverages
- Dairy
- Pharmaceutical
- Medical
- Chemical
- FMCG (Fast Moving Consumer Goods)
- Printing and Labeling
The purpose-designed compact framework, positioning of handlebars and addition of an optional remote-control device provide improved manoeuvrability and ease of use for the operator.
The small footprint makes this roll handling equipment highly manoeuvrable and a natural choice for today’s narrow production lines and demanding lifting requirements.
For further information on this roll lifter, or the full range of lifting and handling equipment, please contact Packline Materials Handling, or contact Ultrasource LLC in the USA for more information on the ‘EZ Lift’.
https://www.packline.co.uk/
https://www.ultrasourceusa.com/ez-lift-film-roll-material-handling-equipment.html
For a full list of worldwide distributors please visit Packline’s website.
Source: PRWeb
View original release here: https://www.prweb.com/releases/packline_materials_handling_announce_the_production_of_their_new_single_arm_clamping_vertical_spindle_attachment_for_handling_telescoping_rolls_of_foil_and_film/prweb17332675.htm